| ACCESSORIES |
For pricing call 1-800-984-3746 |
| A complete set of accessories is available for your PDA automotive diagnostic systems. New Accessories are continuously added to enhance and extend the functions of any PDA tool. Unless otherwise specified all accessories are compatible with private labeled PDA products such as the Insight TM product family from Matco Tools or the Vision TM family of products from OTC. |
PDA12V
- Isolated car battery adapter. Allows you to charge the PDA's battery
while working with PDA system. Connects to the vehicle's battery or the
vehicle's cigarette lighter.
PDAIMPK
- KV adapters for Toyota, Honda, Nissan and other imports that have
integrated ignition coils (coils inside the distributor). Kit consists
of two cables. A must for shops servicing imports.
PDAHEI
- KV adapters for GM high ignition coil that has an integrated ignition
coil (coils inside the distributor), Kit includes one cable.
PDACP
-Inductive Current Probe. A must for testing cranking, charging,
alternator diode pattern, battery condition and other automotive related
components where current measurement to 1,000 Ampres in important.
PDAMACP
- Inductive milliamp current probe. A must for testing sensors, relays,
injectors, stepper motors and other automotive related components where
current measurement from 10 milliamps to 60 amps is important.
PDASL
- 12 foot extended lab scope lend set. Includes 5 cables (4 color coded
signal cables and a ground cable). Useful for on-the-road-testing.
PDA02
- High impedance 02 probe, designed to
manufacturers specifications. Can directly measure oxygen sensor output
safely. Critical in drivability test.
PDABKPB
- Back probe kit. Includes four probes. Eliminates troublesome wire
piercing. Fits standard banana plugs.
PDAC
- AC Adapter / wall charger, specifically matched to the power
requirements of the PDA system.
PDACART
- Roll around cart for storing PDA unit and accessories. Helps keep
components together and accessible at the service bay. Equipped with
lock. (some assembly required).
PDA
SOFTWARE OPTIONS
A powerful feature of the PDA family of automotive diagnostic systems is
the ability to provide additional software applications at the time of
purchase, or later in the field, through PCMCIA memory cards. These
software options will increase the value of your tool:
VIN Specific ECM Pinout Database: The PDAECM option provides a detailed database of all domestic vehicles from 1983. This will help you find the correct wire or connection to probe and the manufacturer specified reading for each sensor or actuator.
PDAGBAEA - PC based software for Omitec's Gas analyzers
Software Features
- User friendly design to make it easy to use without extensive computer knowledge.
- ASM simulation mode and Two Speed Idle (TSI) test functions make testing vehicles easy.
-
Large
configurable meters give easy to read displays that can be used for
diagnosing vehicle emissions failures.
- Built in strip chart recorders give trend
information for quick easy troubleshooting of vehicle problems.
A complete customer and vehicle database allows old customer records to be stored, viewed, and printed. - A vehicle's emissions history can be retrieved at any time in the future to allow for easy comparison of past results.
- Configurable to meet the needs of different emissions tests requirements.
- Professional diagnostic test reports can be printed on any printer that is compatible with Windows 95/98/NT.
- Works with any PC running Windows 95/98/NT and a minimum of 16 Meg of RAM and 1 available com port.
PDAWAVE
- Interface your PDA to a PC to annotate and archive screens captured by
the PDA. Windows based software (Win. 3.1 Win. '95 and Win '98).
PDABATT2
- Nickel Metal Hydride (NiMh) battery for the PDA unit. Replaces the
older style Nickel Cadmium(NiCd). Provides 1,300 MaH capacity (60%
greater than the NiCd capacity). Field replaceable.
FOREIGN
LANGUAGE SUPPORT FOR PDA - For
technicians and shops who feel more comfortable and productive using the
PDA in a foreign language, this option is the solution: PDA software
available in English as well as - Spanish, French, German, Italian,
Portuguese and Dutch. Call for additional language support.
PDAGBSW
- Windows (Win 95, Win 98) based Emission Diagnostics software
To expand the use of your PDA 4 and 5 gas
emission analyzer, this Windows (Win. 3.1, Win 95, Win 98) based
software will let you run it directly from a PC. You can perform and
record tests and print reports for your service files. Enhances testing
in the shop bay.
GBAC
- A/C power supply for 4/5-gas
emission analyzer.
PDA
PC-Link - INTEGRATES the popular PDA
engine analyzer/ lab scope into a Windows based PC environment with a
high-speed communication link, and advanced operating software. This
allows technicians to perform diagnostic tests where they are most
comfortable and where it is most efficient depending on the situation.
They can either work on line, in real time from the PC utilizing the PCs
large screen, mouse and keyboard, or they can disconnect the PDA unit
from the PC, work remotely, and reconnect to upload diagnostic test data
they captured on-the-road. When connected to the PC, controlling the PC
through the PDA keypad allows full remote control of the workstation,
eliminating the need to continuously move between the vehicle and the
diagnostic system.
MIPDAXILS
- Extended lead set for ignition analysis work. Includes 5 cables (to
extend The KV. Sync, primary and ground leads). Useful for
on-the-road-testing of ignition systems.
PDAEIC
- Electronic ignition (DIS) lead set. A must for ignition analysis on
DIS ignition equipped vehicles.
PDAKV
- PDA100/100A KV (SECONDARY) LEAD -
This probe is used to measure secondary ignition voltages. Uses a
capacitive pickup method. Used on the PDA100A/PDA2095 series of
products.
PDASYN
- PDA100/100A SYNC LEAD -
This probe is used for synchronizing (triggering) the primary or
secondary ignition signals. Uses an inductive pickup method. Used on the
PDA100A/PDA2095 series of products.
PDA2050
SYN - PDA2050A SYNC LEAD - This probe
is used for synchronizing (triggering) the primary or secondary ignition
signals. Uses an inductive pickup method. Used on the PDA2050A series of
products.
SCOPE
CLIPS
- PDABC BLUE ALLIGATOR CLIP
- PDARC RED ALLIGATOR CLIP
- PDAYC YELLOW ALLIGATOR CLIP
- PDAGC GREEN ALLIGATOR CLIP
- PDABLC BLACK
ALLIGATOR CLIP
(used on ground lead).
Replacement parts for scope leads.
PDALEADS
- SCOPE LEAD KIT -
consisting of Green, Yellow, Red, Blue and
Black 6' leads, with no alligator clips. Replacement kit for PDA series
scope leads.
PDA100UM
- PDA100 USER MANUAL -
A comprehensive user manual for the PDA2100A series of products. The
manual comes in a 3 ring binder that can be upgraded in the field as the
product is enhanced and improved.
PDALSB1
-
This PDA AUTOMOTIVE WAVEFORMS GUIDE was
written to help you become familiar with the different types of signals
that you will see when testing today's automotive engine management
systems. Digital Storage Oscilloscopes ( DSO ) provide the window that
will allow you watch electrical circuit activity.
The description of good and bad signal examples has been arranged to help you recognize good signals as well as faulty signals. These signals are real world examples taken from a variety of cars and trucks.
PDABOX
- PDA blow molded storage case.
PDAPCH
- protective padded
pouch wraps the PDA tool in a protective
plastic pouch. Makes the unit drop resistant and can extend the life of
the product.
PDACOP
II -
Coil On Plug probe was designed to aid in the diagnosis of coil on plug
(COP) ignition systems where only primary hookup is accessible. This is
especially important for the vehicles with the coil buried inside or
under a valve cover. It is essential to pinpoint the non-performing
cylinder, as well as the nature of the problem. With the help of the
PDACOP-II, electrical failures can be isolated from mechanical
malfunctions, making scope analysis substantially easier.
The PDACOP II probe makes it possible to view and diagnose COP primary ignition waveforms using the PDA lab scope. The PDACOP II probe also has LED's to let you know the probe is connected correctly.
PCLKBL - PC-LINK serial cable - RJ-45 TO DB-9
PDARCABNC - RCA to BNC converter for universal KV CABLE and COP CLIPS
PDAKV2 - Universal cable for secondary probes and clips
COIL ON PLUG PICKUPS
- PDACOP1 - Coil on PLUG CLIP PICKUP for FORD vehicles
- PDACOP2 - Coil on PLUG CLIP PICKUP for Chrysler vehicles
- PDACOP3 - Coil on PLUG CLIP PICKUP for Volkswagen / Audi vehicles
- PDACOP4 - Coil onN PLUG CLIP PICKUP for Honda / Isuzu vehicles
- PDACOP5 - Coil on PLUG CLIP PICKUP for Volvo / BMW vehicles
- PDACOP6 - Coil on PLUG CLIP PICKUP for Mercedes Benz vehicles
- PDACOP7 - Coil on PLUG CLIP PICKUP for Mercedes Benz vehicles
PDA231KIT - Kit includes: SW VER. 3.1E, PDAKV2, PDCOP1 (Ford cop clip), PDACOP2 (Chrysler cop clip), 2 X PDARCABNC
PDACOPKIT - Kit includes:: PDAKV2, PDCOP1(Ford cop clip), PDACOP2 (Chrysler cop clip), 2 X PDARCABNC
PDACOPKITA - Kit includes: PDAKV2, PDCOP1 (Ford cop clip), PDACOP2 (Chrysler cop clip), 2 X PDARCABNC, PDACOP3 (VW), PDACOP4 (HONDA/ISUZU), PDACOP5 (VOLVO/BMW), PDACOP6 (MB-1), PDACOP7 (MB-2)
PDA231KITA - Kit includes: SW VER. 3.1E, PDAKV2, PDCOP1 (FFord cop clip), PDACOP2 (Chrysler cop clip), 2 X PDARCABNC, PDACOP3 (VW), PDACOP4 (HONDA/ISUZU), PDACOP5 (VOLVO/BMW), PDACOP6 (MB-1), PDACOP7 (MB-2)
PDASW231U - PDA2100A software update for current user - VER. 3.1E - PDA2000 UPDATE ONLY