| PDA2100A
Diagnostic Tool Specifications General
System Features
- Complete hand held automotive
diagnostic system
- PC compatible system
- Portable system, can be used on the
road
- Simple, clearly marked, user friendly
keypad; directional keys, enter/exit keys and 4 function keys
- Modular design enables user to add
modules for added functionality and versatility
- Built-in, screen context sensitive
HELP function
- Includes a WAVEFORM LIBRARY with 20
known good waveforms
General Function Features
LAB SCOPE
- Four channel Digital Storage
Oscilloscope (DSO)
- Displays up to 4 different waveforms
at a time
- AUTO scope setup
- Store and replay up to 8 waveform
files
- ( up to 50 screens in each file)
- User configurable probe menu for use
with almost any type probe
MULTIMETER
- Four channel digital multimeter
- Displays digital values up to 4
signals at a time
- Digital displays up to 6 panels at a
time
- User configurable probe menu for use
with almost any type probe
AUTO METER
Preconfigured meter, giving the user all
necessary data for
- INJECTOR
- O2 sensor
- MAP/MAF ANALOG
- MAP/MAF DIGITAL
- TPS
IGNITION SCOPE
- 5 MHz analog peak detect circuit to
capture all max. spark signals
- Shows primary or at secondary
waveform patterns for up to 8 cylinders a time
- Full DIS/Conventional ignition system
waveform display capabilities (raster , parade and single
cylinder)
- Extensive vehicle database
- Shows primary and secondary ignition
waveforms on the same screen ("BOTH" mode)
- Shows DIS power and waste ignition
waveforms for up to 8 cylinders at a time
- Shows DIS both power and waste on the
same screen ("BOTH" mode)
- HISTOGRAPHS (View primary or
secondary up to 8 cylinders at a time)
- SINGLE CYLINDER TEST
- Digital KV meter (polarity, min.,
max. and live KV)
- BARGRAPHS
- Spark KV/V bargraph (secondary or
primary)
- Spark KV bargraph (DIS power or
waste)
- Burn KV bargraph
- Burn time bargraph
- Dwell bargraph
ENGINE TESTS
- DIODE TEST (Alternator test)
- CYLINDER EFFICIENCY TEST (Cylinder
Contribution test for computer controlled engines)
- CRANKING TEST (Relative compression test
for both conventional and DIS systems)
- POWER CHECK (Power balance test for non
computer controlled engines)
QUICK IGNITION
- Shows primary or secondary ignition
waveform patterns
- Displays every ignition cycle on screen
- Store and retrieve up to 8 ignition
waveform files (up to 50 screens for each file)
- Digital ignition meter showing: polarity,
min., max. and live KV
Cursor Functions
- -
Full cursor functions in Lab Scope , Ignition Scope and Quick
Ignition
- - Displays two measurement points and the
difference between them
- - Choice of 3 different cursor
measurements
-
- Volt difference
- Time difference
- Frequency (Hz)
Power Features
- Operates from 3 different power sources:
- Vehicle battery, using the vehicle
battery adapter
- Six AA rechargeable internal battery
pack (up to 4 HRS. on a full charge)
- A/C charger/converter
- Power Management
- Power saver feature
- Low battery indicator
- Rechargeable while in use
- Rechargeable with A/C adapter or vehicle
battery adapter
- Fast charge in 1 hour
Printing
- Print any display screen except F1-HELP
- Serial port links to any EPSON or HP
graphics compatible printer
Physical Dimensions (with module)
- Length: 10"/25.4cm
- Width: 4.75"/12.1cm (max)
- Depth: 1.6"/4.1cm(max)
- Weight: 1.8 lbs./0.85 kg
Environmental Operating
Specifications
- Operating temp. 0 C to 45 C (humidity 20%
to 85%)
- Storage temp: -5 C to 50 C (humidity 20%
to 85%)
- Dust water and grease resistant
- Rubber bumpers and shock resistant
System Specifications
- Removable memory card (PCMCIA type II)
- Total of 1220 screens (including
replay files and reports)
- Total of 24 save and replay files (up
to 50 screens for each file)
- Total of 20 report screens available
to save and print
- Time and date setup
- Power management
- Power on time
- Backlight on time
- Sampling on time
Display Information And Screen
Refresh Rate
- High resolution LCD super twist display:
256 X 320 pixels
- Cold cathode fluorescent backlighting
on/off control
- Usable in total darkness
- Contrast control keys
Screen refresh rate
- Lab scope : @ 0.5 ms/div. = 10/sec.; @ 10
sec./div. = 1/min.
- Multimeters : Bar Graphs = 4/sec.,
digital = 1/sec.
- Autometers : - Injector (scope) = 3/sec.
- 02 = continuous
- MAP/MAF analog = continuous
- MAP/MAF digital = 3/sec.
- TPS = continuous
- Ignition Scope : - Below 1700 RPM = every
third ignition cycle (example: 700 RPM = 2.5/sec.)
- Quick Ignition : - Below 1700 RPM = every
ignition cycle (no RPM displayed)
- Above 1700 RPM = every other ignition
cycle (no RPM displayed)
- Example: 700 RPM 5/sec. (with no RPM
displayed)
Test Specifications
LAB SCOPE
- Sampling rate: 2.2 MHz
- Band width: 5MHz
- Sweep rate: 25 us/div. to 10 sec./div.
- Voltage range: 125 mV/div. to 50 V/div.
- Accuracy: 0.5%
- Time base: 25 us/div. to 10 sec./div
- Trigger with autoset capability
MULTIMETER
- Sampling rate: 500 KHz
- Band width: 5MHz
- Sweep rate: 0.5 ms/div. to 10 sec./div.
- Min. 0.5% accuracy
- Max. 0.5% accuracy
- Avg. 0.5% accuracy
- RMS 0.5% accuracy
- Frequency (4Hz to 50 KHz)
IGNITION
- RPM range: 100 to 12000 RPM
- Primary voltage: 0 to 750 V
- Secondary display ranges
- -9 KV to 45 KV
- -5 KV to 25 KV
- -2 KV to 6 KV
- Time base: 1.0 ms/div. to 10 ms/div.
- Burn time 0 to 10 ms (0.1 ms resolution)
- Dwell range;
- Degrees , 0 to 360 , 1 resolution
(divided by number of cylinders)
- Percent: 0 to 100%, 1% resolution
Additional Features Available
- Portable 4-gas
- Portable 5-gas
- OBD II Scanner
- Spanish and 5 language software also
available
|
The
Omitec
PDA2100A Ignition Analyzer is
the only hand-held full function engine analyzer . It includes 6 tools
in one powerful, easy -to-use, hand-held unit.
The
Omitec PDA2100A is a revolutionary diagnostic product that
provides a wide range of automotive diagnostic functions at a low cost.
Diagnostic functions such as ignition analysis, cylinder efficiency,
oscilloscope and others are for the first time available in a
convenient, integrated hand held and low cost package.